CX-IPH-1201A Industrial PH Meter

 CX-IPH-1201A Industrial PH Meter is a kind of in-line meter that is used for water quality analysis and monitoring and is equipped with a microprocessor. It can be widely used for continuous monitoring of the PH values of the demineralized water, raw water, steam condensate, distilled sea water, de-ionized water, etc.

It is applicable for pure and ultrapure water treatment and industrial and sewage water treatment in the following industries: electric power, environmental protection, chemical industry, petroleum, paper making, metallurgy, semi-conductor, medicine and foodstuff.

 

Features:  

Large vacuum fluorescent display (VFD), Chinese menu, and man-machine interaction function

It is available with automatic temperature compensation, one-point and two-point calibrations and the existing PH

value calibration.

Available with history curve, real-time trend chart and clock.

There are four kinds of built-in recorders. It has the functions of isolated current output and alarm.

The user can set the password or consult the “Help” menu or the “Service Guide” Menu.

It has power-off protection. The data can be saved for 5 years under a continuous power-failure condition.

The communication interface can be connected directly to a computer and enables remote operation and control.

The instrument adopts universal module power supply.

It is equipped with technically high-performance PH electrodes and it is characterized by its more stable and

reliable measuring results, easy use and minimal maintenance.

 

Technical indexes:

1. Measuring range: PH value: 0~14.00pH; temperature: 0~60℃

2. Range for automatic temperature compensation: 0~60℃ (with 25℃ as the reference temperature)

3. Intrinsic error of electronic units: PH value: ±0.05pH; temperature: ±0.05℃

4. Error of the automatic temperature compensation: ±0.03pH ±1 unit

5. Stability: ±0.02pH/24h

6. Input impedance: ≥1x1012Ω

7. Input current: ≤1x10-12A

8. Water sample pressure: 0.6Mpa

9. Isolated output: 0~10mA (load resistance <1.5KΩ) or 4~20mA (load resistance <750Ω)

10. Normally-open contact of the alarm relay: 3A 240V AC, 6A 28V DC or 120V AC

11. Overall dimension of the electrode unit: 151 (length) x 151 (width) x 251 (depth) mm

12. Dimension of the mounting hole of the electronic unit: 138 x 138mm

13. Weight of the electronic unit: 1.2kg

14. Power supply: 85~265VAC 50±1Hz

15. The connection patters of the inlet and outlet water tubes: Pipes and hoses and flanged pipes should be of the

following diameters: Φ6, Φ8, Φl0, Φ12 and Φ14.

More sensor types and installation methods are: [flow-through type][duct-type][immersed type]