CX-IPH-1207 Industrial PH Meter

 CX-IPH-1207 series of microcomputer-based industrial control instruments are precision meters for measurement of PH value of solution. With simultaneous display of PH value and temperature, complete functions, stable performance, simple operation and other advantages, they are optimal instruments for industrial measurement and control of PH value. It is characterized by single-chip technology, LCD display with back light, automatic temperature compensation, two-point calibration, high/low point control and current output, making it an optimal meter for medium and small-scale measurement and control of PH value. It is widely use for on-line measurement and monitoring of water quality in industrial processes in pharmacy, electronics, chemical engineering and many other industries.

Various PH electrodes can be used in CX-IPH-1207 series of instruments.

Features:  

US T1 chips; 96 x 96 world-class shell; world-famous brands for 90% parts;

Isolated protection output by means of photocoupler; no interference between input and output signals;

EEPROM memory; backup battery not required and no data loss after power-off;

High-performance operational amplifier; symmetrical ORP positive and negative values; low temperature drift;

high stability and accuracy.

 

Technical indexes:

Measuring range: pH 0.00~14.00pH; resolution: 0.01 pH

Precision: ±0 1 pH; Stability: ≤0.05pH/24h

Control range: 0-14.00pH

Temperature compensation range: 0-60℃

Temperature of medium: 5-50℃

Output control mode: On/Off relay output contacts;

maximum load: 230V/5A

Output signal: 4-20mA isolated protection output;

maximum load: 500Ω

Size of thread: Upper and lower 3/4” pipe thread (electrode installation dimension)

Pressure of medium: 0-0 5Mpa

Display mode: 3 1/2 LCD

Power supply: AC 220V ±10％50Hz

Power consumption: 5W

Ambient conditions: (1) Temperature: 0-50℃; (2) Humidity ≤85％RH

Overall dimension: 96 ×96 ×115mm(height x width x depth)

Dimension of the hole: 92 ×92 mm (height x width)