Location -> Products -> Pressure -> Pressure gauge -> Normal Pressure Gauge
Type：CX-PG-0 series oxygen pressure gauge
Illustrate：Oxygen pressure gauge is applicable to the measurement of using oxygen as the medium’s occasion, it is strictly prohibited to contact the fat class materialon the panel of the oxygen pressure gauge must mark “No oil” mark ing words.
CX-PG-0 Series Oxygen Pressure Gauge
Use instruction
Oxygen pressure gauge is applicable to the measurement of using oxygen as the medium’s occasion, it is strictly prohibited to contact the fat class materialon the panel of the oxygen pressure gauge must mark “No oil” mark ing words.
Structure
Oxygen pressure gauge and common pressure gauge’s structure is consistent.
Main technical datas
| Type | Measuring range（MPa） |
Accuracy ±% |
Screw thread |
| 60mm |
-0.1~+0.06,0.15,0.3,0.5,0.9,1.5,2.4 0~0.16,0.25,0.4,0.6,1.0,1.6,2.5,4.0, 6.0,10,16,25,40,60 |
2.5 |
M14*1.5 G 1/4 1/4 NPT |
|
100mm 150mm |
1.5 |
M20*1.5 G 1/2 1/2 NPT |
|
| Note | 100, 150 can be used for measuring 0~100MPa | ||
Notes：
The main difference between oxygen pressure gauge and the common pressure gauge is oxygen pressure gauge is no oil gauge，that is to say in the final check assembly pressure gauge is by air or water to check the meter pressure，but the common pressure gauge is by oil to check，Because oxygen is not spontaneous but it can combustion-supporting, so must no oil.
Last：CX-PG-TFE/E pressure gauges Next：CX-PG-A / AB / TNA / TN-BF seri..
