Location -> Products -> Pressure -> Pressure gauge -> Normal Pressure Gauge
Type：CX-PG-P / TP series diaphragm pressure gauges
Illustrate：The gauge is made up of measuring system (including flange connector and diaphragm seal etc.) pressure transfer system and indicating device (including crank arm, gears, point and dial etc.), and out crust (including crust, cover and glass etc.)
CX-PG-P / TP series diaphragm pressure gauges
The gauge is made up of measuring system (including flange connector and diaphragm seal etc.) pressure transfer system and indicating device (including crank arm, gears, point and dial etc.), and out crust (including crust, cover and glass etc.).
The working principium of the gauge is that diaphragm can take place elastic distortion under the pressure of medium, and the change is transformed and amplified by gears, then drives the pointer over a dial to provide a pressure reading.
Technical Specifications
PG:Pressure gauge
P:diaphragm pressure gauges
TP:Anti-vibration diaphragm pressure gauges
X:Control type: Snap-action contact
C:Contact type: Magnetic
Accuracy:2.5,
Operating condition temperature: -40~70C
Relative humidity ≤ 90%
Temperature effect :when working temperature deviates from 20±5C, the additional temperature error is not more than 0.4%/10℃.
Nominal diameter:60.100.150mm
A:Diaphragm seal pressure gauge(M20X1.5)
B:Stainless steel diaphragm seal pressure gauge (M20X1.5 male screw connector)
B-F:Stainless steel diaphragm seal pressure gauge with flange connector (25-4.0HGJ direct mounting flange)
| Type |
flange connector DN15 |
male screw connector M20*1.5 | male screw connector M20*1.5 |
Accuracy ±% |
| CX-PG-TP(Bar) | CX-PG-P(Mpa) | CX-PG-XCP (Mpa) | ||
|
60mm 100mm 150mm |
0~6; 0~10; 0~16; |
0~0.1;0~0.16;0~0.25; 0~0.4;0~0.6;0~1;0~1.6 0~2.5;0~4;0~6;0~10; 0~16;0~25;0~40;_0.1~0; _0.1~0.06;_0.1~0.15; _0.1~0.3;_0.1~0.5; _0.1~0.9;_0.1~1.5; _0.1~2.4; |
2.5 | |
Last：CX-PG-SD series hygiene type di.. Next：CX-PG-TFE/E pressure gauges
