Location -> News
News
Gasoline Transfer Pump Selection
Gasoline Transfer Pump Selection Guide and Recommended Solution
I. Customer Core Needs Analysis
Based on the parameters provided by the customer, the gasoline transfer pump must meet the following key conditions:
Media Characteristics: Gasoline (flammable and explosive, explosion-proof design required)
Flow Rate Requirement: 26.5 m³/h (requires stable and efficient delivery)
Suction Lift and Head: Maximum suction lift 6 meters, water column height 19 meters (corresponding to approximately 19 meters head)
Temperature Range: Maximum 50℃ (requires high-temperature resistant seals and materials)
Particle Tolerance: Maximum particle diameter 16mm (requires anti-clogging design)
Electrical Parameters: 3-phase motor, 230V/400V 50Hz, IP55 protection
Weight Limitation: Pump body weight 32.5kg (portability and stability must be considered)
II. Recommended Pump Model: KCB483.3 7.5-4 Transfer Pump
Technical Parameter Matching Analysis:
Parameters | Customer Needs | KCB483.3 7.5-4 Pump | Matching Result
Media | Gasoline | Gasoline | ✅ Perfect Match
Flow Rate 26.5 m³/h ✅ Precise Match
Maximum Suction Lift: 6 meters ✅ Full Match
Head (Water Column): 19 meters, corresponding pressure 0.36MPa (≈36.7 meters) ✅ Far Exceeds Requirements
Temperature: 50℃ ✅ Full Match
Particle Diameter: 16mm ✅ Full Match
Motor Type: 3-Phase Motor, 3-Phase Explosion-Proof Motor (BT4) ✅ Upgraded Match
Protection Rating: IP55 ✅ Full Match
Voltage: 230V/400V 50Hz ✅ Full Match
Sealing Method: Unspecified, Packing Seal (Resistant to Gasoline Leakage) ✅ Preferred Solution
Current Flow Material: Unspecified, HT200 (Corrosion-Resistant Cast Iron) ✅ Industrial Grade Durable
III. KCB483.3 7.5-4 Core Advantages of the Pump:
Explosion-proof Safety: Equipped with a BT4-level explosion-proof motor, meeting the standards for conveying flammable media such as gasoline, reducing the risk of explosion.
High Efficiency and Stability: Flow rate and suction head are precisely matched to customer needs; redundant head design (0.36MPa) ensures long-distance conveying capability.
Particle-resistant Design: 80mm inlet diameter, allowing 16mm particles to pass through, preventing clogging, suitable for conveying gasoline containing impurities.
Temperature and Corrosion Resistance: HT200 flow parts are resistant to gasoline corrosion; packing seals are suitable for high-temperature environments up to 50℃, reducing the risk of leakage.
Electrical Compatibility: Supports 230V/400V dual voltage, adapting to different power grid environments; IP55 protection for dust and water resistance.
For more information on specific selection and pricing of transfer pumps, oil pumps, and industrial pumps, please contact CIXIFM. Winny:
Email: sales01@cxflowmeter.com
WhatsApp: 008618049841995
Last：沒有了 Next：Float Level Controller Selection
