Dual-Power Submersible Sewage Pumps

 

Breaking Through Operating Limits! CIXIFM's Dual-Power Submersible Sewage Pumps Redefine Sewage Cleaning Efficiency with "Hardcore Cutting + Intelligent Design"

 

In the extreme climate and complex operating conditions of the UAE, septic tank cleaning and construction site drainage often face three major challenges: hard debris clogging the pump, difficulty in deployment in confined spaces, and insufficient equipment durability. Traditional sewage pumps, due to their weak power and crude design, result in frequent downtime and high maintenance costs. Addressing this industry pain point, CIXIFM has launched 5.5kW and 7.5kW dual-power submersible sewage pumps, featuring an integrated "cutting-mixing-transfer" design, providing engineering teams with an efficient, stable, and low-cost solution!

 

I. Why Choose CIXIFM? Three Core Advantages Address Industry Pain Points

 

1. Robust Cutting System: One-Pump Crusher for Gravel, Wood, and Fabric

 

Dual-Blade Cutting Disc + High-Speed ​​Agitator: Utilizes carbide blades with a rotation speed of up to 2950 rpm, instantly crushing gravel, wood chips, and fibrous fabrics with a diameter ≤50mm, preventing pipe blockage;

Imported Filter Pre-treatment: Filters large particles, reducing blade wear and extending service life;

Actual Test Data: At a construction site in Dubai, the 7.5kW pump continuously pumped wastewater containing gravel for 12 hours with zero system failures, achieving 60% higher efficiency than traditional pumps.

 

2. Compact Design: 60cm Wide "Slimmed-Down" Version, Adaptable to All Standard Well Openings

 

Optimized Size: Pump body width is only 58cm, height is less than 1 meter, allowing direct placement through UAE standard well covers (60cm×60cm) without additional excavation or modification;

Lightweight Structure: Cast iron pump head + high-strength plastic shell, reducing the overall weight by 15% compared to similar products, facilitating manual handling and installation.

 

3. All-Scenario Protection: IP68 Waterproof + Mechanical Seal, Maximum Durability

 

Protection Rating: IP68 waterproof and dustproof, diving depth up to 10 meters, adaptable to extreme environments such as sandstorms and high temperatures;

Sealing Technology: Double-end mechanical seal + oil chamber isolation design, completely eliminating sewage leakage, extending motor life to over 3 years;

Corrosion-Resistant Materials: Pump head uses cast iron with galvanized finish, hoses and cables have passed UV anti-aging tests, adaptable to the strong ultraviolet environment of the UAE.

 

II. 5.5kW vs 7.5kW: How to Choose the Most Suitable Model for You?

 

Parameters: 5.5kW (7.5hp) 7.5kW (10hp)

 

Applicable Scenarios: Small and medium-sized septic tanks, construction site drainage; large sewage treatment plants, industrial wastewater transfer

 

Flow Rate/Head: 20m³/h @ 10m 25m³/h @ 12m

 

Cutting Capacity: Crushes soft impurities (paper, fabric); Crushes hard impurities (stones, wood blocks)

 

Recommended Reasons: High cost-performance ratio, low energy consumption; powerful, suitable for high-concentration impurity conditions

 

Customer Cases:

 

Abu Dhabi Municipal Project: 5.5kW pumps were used to clean septic tanks in residential areas, with a single unit processing an average of 80m³ of sewage per day, reducing operating costs by 40%;

 

Jebel Ali Industrial Park: 7.5kW pumps continuously pumped oily wastewater; the cutting system effectively crushed oil residue, preventing pipe scaling and extending the maintenance cycle to 3 months.

 

Contact Us:

 

Email: sales01@cxflowmeter.com

 

WhatsApp: 008618049841995