Location -> Products -> Level -> Ultrasonic Level Meter
Type： CX-ULM-DM open channel ultrasonic flowmeter
Illustrate：Open channel Ultrasonic flowmeter employ ultrasonic to measure venture and Parshall flow.
CX-ULM-DM Open channel Ultrasonic flowmeter
Brief introduction
Open channel Ultrasonic flowmeter employ ultrasonic to measure venture and Parshall flow.
According to time from ultrasonic touch the channel water surface to reflection, it gets flow
through formula. It can display speed and total flow. You can select relay, switch or digital
interface signal output of our production.
Application
Aqueduct
Wastewater treatment
Features:
High precise
Selectable output mode
Strong anti-interference
Automatic temperature compensation
Specification:
Full scale: 10L/S~10m3/S
Unusable area: ≤0.3m
Accumulative flow range: 99999999 (up to 8 figures auto-zero recalculate)
Display content: liquid level, momentary flow, accumulative flow
Probe level: 0.3-5.0m
Probe frequency: 20 K-43 KHz
Measurement resolution: ±0.25% X full scale
Display resolution: 1mm
Probe display: 4 figure Nixie
Equipment setting: 3 sensitive key
Power: AC 220V
Output signal: RS485 (other output signal is available)
Dimension: Φ75mm×M48mm×110mm
Material: ABS plastic for cover; PP for transducer
Fix model: out straight screw M50×1.5
Admission cable: 1.5m
Protection degree: IP65
Ambient pressure: normal condition
Temperature: 0℃ ~50℃ for work , -40℃~85℃ for storage
Humidity : ≤80﹪ Non-Condensing for work, ≤70﹪
Non-Condensing for storage
Note: preparation
Rectangular weir: 1~4%
Triangular weir: 1~2%
Parshall flume: 3%
Brief introduction
Open channel Ultrasonic flowmeter employ ultrasonic to measure venture and Parshall flow.
According to time from ultrasonic touch the channel water surface to reflection, it gets flow
through formula. It can display speed and total flow. You can select relay, switch or digital
interface signal output of our production.
Application
Aqueduct
Wastewater treatment
Features:
High precise
Selectable output mode
Strong anti-interference
Automatic temperature compensation
Specification:
Full scale: 10L/S~10m3/S
Unusable area: ≤0.3m
Accumulative flow range: 99999999 (up to 8 figures auto-zero recalculate)
Display content: liquid level, momentary flow, accumulative flow
Probe level: 0.3-5.0m
Probe frequency: 20 K-43 KHz
Measurement resolution: ±0.25% X full scale
Display resolution: 1mm
Probe display: 4 figure Nixie
Equipment setting: 3 sensitive key
Power: AC 220V
Output signal: RS485 (other output signal is available)
Dimension: Φ75mm×M48mm×110mm
Material: ABS plastic for cover; PP for transducer
Fix model: out straight screw M50×1.5
Admission cable: 1.5m
Protection degree: IP65
Ambient pressure: normal condition
Temperature: 0℃ ~50℃ for work , -40℃~85℃ for storage
Humidity : ≤80﹪ Non-Condensing for work, ≤70﹪
Non-Condensing for storage
Note: preparation
Rectangular weir: 1~4%
Triangular weir: 1~2%
Parshall flume: 3%
Last：CX-ULM-DS,CX-ULM-CS mini ultra.. Next：CX-ULM-DA ultrasonic level diff..
