• <blockquote id="o6sq2"><tfoot id="o6sq2"></tfoot></blockquote>
    <center id="o6sq2"></center>
  • <th id="o6sq2"><nav id="o6sq2"></nav></th>
  • <ul id="o6sq2"><tbody id="o6sq2"></tbody></ul>
      <samp id="o6sq2"></samp><ul id="o6sq2"><tbody id="o6sq2"></tbody></ul>

      sales@gninstruments.com

      Location -> Products -> Flow -> Flowmeter For Liquid

      Type:CX-WUFM-TDS-100F wall-mounted ultrasonic Flowmeter

      Illustrate:CX-WUFM-TDS-100F wall-mounted ultrasonic Flowmeter is Widely used to measure on-line different liquids in industries

      CX-WUFM-TDS-100F wall-mounted ultrasonic Flowmeter

      Brief Introduction
      CX-ULM-PM flow meter is a universal industry intelligent instrument. 4-20mA, 0-20mA, 1-5V and 0-5V linear signal output and RS485or RS232 serial output are optional.  Our ultrasonic sensor combine with integrating meter,it's a flow system(wall mounted ultrasonic flowmeter). 
      Main Features
      1. Low sensor power consumption, easy installation and orientation, application wildly ,standard 4-20mA output, use it separately as liquid level meter
      2. Easy operation, widely used in thin plate right-angle weir, triangular weir, parshall…
      3. data storage. When power off, it can save 10 years.
      4. According to condition, it can choose special sensor such as: anti-erosion, anti-explosion…
      5. Base on user's demand, it can attach flash disk, micro printer and storage battery

       Technical Parameters

       

      Power AC 85—264V or isolation DC 8-36VDC
      Repeatability Better than 1%
      Signal output 1.One channel standard isolation RS485 output
      2.One channel isolation 4-20mA or 0-20mA active output
      3.One channel OCT output(the pulse width between 6ms to1000ms)
      4.One channel isolation relay output with positive,negative,net accumulation pulses and different alarm signals
      Signal input 1.Two channel 3 wires system PT100 platinum resistor input loop,to make heat meter has the function of displaying heat quantity
      2.Three channel 4-20mA input optional,accuracy:0.1%,has the ability to input the signals of pressure, liquid level, temperature and so on.
      Display 2*20 backlit LCD
      Operating 4*4 tactile keypad
      Protection level Mainframe:IP65, transducer:IP:68
      Transducer Clamp-on type,insertion type,in-line type.

      Other Functions:
      1.Automatic memory the positive,negative,net totalizer flow rate and heat quantity of the last 512 days,128 months,10years
      2.Automatic memory the time of power on/off and flow rate of the last 30 times, realize to replenish by hand or automatically,read the data through Modbus communication protocol.  
      Application:
       Right-angle rectangular weir, triangular weir, width weir, parshall flume  

      Last:CX-OGFM-XJYM oval gear flow met.. Next:CX-FM fuel consumption flow met..

      Contact Us

      Office Address: Room 402, No. 650, Xinzhuan Rd., Jiuting Town, Songjiang District, Shanghai, China (Mainland)

      Phone:021-57635022

      E-mail:info@gnflowmeter.com

      E-mail:sales@gninstruments.com

      關(guān)閉
    • <blockquote id="o6sq2"><tfoot id="o6sq2"></tfoot></blockquote>
      <center id="o6sq2"></center>
    • <th id="o6sq2"><nav id="o6sq2"></nav></th>
    • <ul id="o6sq2"><tbody id="o6sq2"></tbody></ul>
        <samp id="o6sq2"></samp><ul id="o6sq2"><tbody id="o6sq2"></tbody></ul>