CX-ICPW-1703、CX-ICPW-1704
Industrial Composite Pure Water PH Electrode
Basic Features of pH Pure Water Electrode

    The polymer filling makes the reference junction potential very stable.
    The diffusion potential is very stable; large-area diaphragm surrounds the glass diaphragm bubbles, so that the distance from the reference diaphragm to the glass diaphragm is near and constant; the ions diffused from diaphragm and the glass electrode quickly form a complete measurement circuit to respond quickly, so that the diffusion potential is not easy to be affected by the outside flow rate and is thus very stable!
    As the diaphragm adopts the polymer filling and there is small and stable amount of overflowing electrolyte, it shall not pollute the measured pure water.
Therefore, the above-mentioned features of the composite electrode make it ideal for measuring PH value of high-purity water!

Model No.: CX-ICPW-1703 Measuring range: 0-14pH Temperature range:0-85℃ Compressive strength:0.6MPa Material: PPS/PC Slope: ≥96％ Zero point potential: E0=7PH±0.3 Internal impedance:  MΩ(25℃) ≤250 MΩ			Model No.: CX-ICPW-1704 Measuring range: 0-14pH Temperature range:0-85℃ Compressive strength:0.6MPa Slope: ≥96％ Zero point potential: E0=7PH±0.3 Internal impedance: MΩ(25℃) ≤250 MΩ Profile: 3-in-1Electrode (Integrating the temperature  compensation and the solution grounding) Installation size: Upper and Lower 3/4NPT Pipe Thread Connection: Low-noise cable goes out directly. Application: Measurement of all kinds  of pure water and high-purity water.
Installation size: Upper and Lower 3/4NPT Pipe Thread
Connection: Low-noise cable goes out directly. Application: Measurement of all kinds  of pure water and high-purity water.

Features of PH Electrode:
● It adopts the world-class solid dielectric and a large area of PCE liquid for junction, difficult to block and
it adopts the world-class solid dielectric and a large area of PCE liquid for junction, difficult to block and
● Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh
environment.
● It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is easy for installation and there is
no need of the jacket, thus saving the installation cost.
● The electrode adopts the high-quality low-noise cable, which makes the signal output length more than 40
meters free of interference.
● There is no need for additional dielectric and there is a little amount of maintenance.
● High measurement accuracy, fast echoing and good repeatability.
● Reference electrode with silver ions Ag/AgCL
● Proper operation shall make service life longer.
● It can be installed in the reaction tank or pipe laterally or vertically.
● The electrode can be replaced by a similar electrode made by any other country.
 
 Electrode Structure Chart                                     Electrode Wiring Plug