Location -> News
News
Micro flow sensor used in antacid milk filling machine
sales01@cxflowmeter.com
One of our Thailand customer sent us an inquiry. They said they are interested in our food grade flow meters.
One of our Thailand customer sent us an inquiry. They said they are interested in our food grade flow meters.
The customer provided the following information:
Specification is
1. Stainless Steel 316
2. Orifice 1/2"
3. Flow rate around 25 liter/minimum
They are developing antacid milk solution filling machine and our previous flow sensor system was Solution tank>pump>check valve>solenoid valve>flow sensor.
Photos as below:
From this picture, you can see it is plastic flow meters, but they need stainless steel material for food grade.
Because of viscous solution, the customer had already changed flow sensor from turbine flow meter to oval gear flow sensor but they want to use stainless steel sensor instead of plastic one.
They are planning to use in production line and sell this system to other manufacturers.
Our customer also foreseen the great opportunity in his country because oval gear flow sensor had not much more popular in Thailand yet, it s a great opportunity then.
Our oval gear flow meters have been widely used in the following measuring media:
Medium : All kinds of liquids, gasoline ,diesel oil ,hot melt glue,wax, etc
If you are also interested, welcome your consultation at any time: sales01@cxflowmeter.com
Last：Hot Melt Adhesive Flow Meter Next：Petrol Micro oval gear flow met..
